Difference between revisions of "Tutorial:PhysicsCollisionCallbacks"

(Removed normalImpulse2/tangentImpulse2 from callbacks, because they aren't actually part of the API.)
(Added warning to not call during callbacks)
Line 6: Line 6:
  
 
In this tutorial we will create a collision between two objects that calls certain callbacks set by [[World:setCallbacks]].
 
In this tutorial we will create a collision between two objects that calls certain callbacks set by [[World:setCallbacks]].
 +
 +
{{notice|Making changes to a [[World]] is not allowed inside of the [[beginContact]], [[endContact]], [[preSolve]], and [[postSolve]] callback functions, as BOX2D locks the world during these callbacks.}}
  
  

Revision as of 07:41, 14 October 2018

Preface

If you do not have a good grasp on love.physics, you should first check out this physics tutorial.

In this tutorial we will create a collision between two objects that calls certain callbacks set by World:setCallbacks.

O.png Making changes to a World is not allowed inside of the beginContact, endContact, preSolve, and postSolve callback functions, as BOX2D locks the world during these callbacks.  



Tutorial

main.lua setup

Let's start by setting up main.lua with 3 love functions: love.load, love.update, and love.draw

function love.load()
	
end
function love.update(dt)
	
end
function love.draw()
	
end

World setup

Now that we have a framework setup, let's setup a physics world in love.load with newWorld. We will also use World:update.

function love.load()
	--Store the new world in a variable such as "world"
	world = love.physics.newWorld(0, 200, true)  --Gravity is being set to 0 in the x direction and 200 in the y direction.
end

function love.update(dt)
	--Never forget to update your world every frame.
	world:update(dt)
end

Now we want to create a ball and a ground. To do this we will need newBody, newCircleShape, and newRectangleShape. We'll connect the bodies to the shapes using newFixture.

function love.load()
    ... -- don't include this, it's just indicating where the existing code for the function should be

    ball = {}
        ball.b = love.physics.newBody(world, 400,200, "dynamic")  -- set x,y position (400,200) and let it move and hit other objects ("dynamic")
        ball.b:setMass(10)                                        -- make it pretty light
        ball.s = love.physics.newCircleShape(50)                  -- give it a radius of 50
        ball.f = love.physics.newFixture(ball.b, ball.s)          -- connect body to shape
        ball.f:setRestitution(0.4)                                -- make it bouncy
        ball.f:setUserData("Ball")                                -- give it a name, which we'll access later
    static = {}
        static.b = love.physics.newBody(world, 400,400, "static") -- "static" makes it not move
        static.s = love.physics.newRectangleShape(200,50)         -- set size to 200,50 (x,y)
        static.f = love.physics.newFixture(static.b, static.s)
        static.f:setUserData("Block")
end

The objects are there now, but you can't yet see them. Let's draw them.

function love.draw()
    love.graphics.circle("line", ball.b:getX(),ball.b:getY(), ball.s:getRadius(), 20)
    love.graphics.polygon("line", static.b:getWorldPoints(static.s:getPoints()))
end

Now we should see a ball fall down and hit a solid rectangle.

World Callbacks

But what if we want more information on the two objects colliding? Now we will use World:setCallbacks to further dissect their collision(s).

First thing we do is set the world callbacks with World:setCallbacks. There are four callbacks for a collision: beginContact, endContact, preSolve, and postSolve.

beginContact gets called when two fixtures start overlapping (two objects collide).
endContact gets called when two fixtures stop overlapping (two objects disconnect).
preSolve is called just before a frame is resolved for a current collision
postSolve is called just after a frame is resolved for a current collision.
function love.load()
    ...  -- substitute for the rest of love.load

    world = love.physics.newWorld(0, 200, true)
        --These callback function names can be almost any you want:
        world:setCallbacks(beginContact, endContact, preSolve, postSolve)

    text       = ""   -- we'll use this to put info text on the screen later
    persisting = 0    -- we'll use this to store the state of repeated callback calls

Now define each function you just named.

function beginContact(a, b, coll)
	
end

function endContact(a, b, coll)
	
end

function preSolve(a, b, coll)
	
end

function postSolve(a, b, coll, normalimpulse, tangentimpulse)
	
end

These functions are called every time one of the collision actions happen. They pass in two fixtures and a collision object. The postsolve callback also contains the normal and tangent impulse for each collision contact point. These parameters can also be named to whatever you want. In this tutorial, we choose a, b, and coll.

  • a is the first fixture object in the collision.
  • b is the second fixture object in the collision.
  • coll is the contact object created.
  • normalimpulse is the amount of impulse applied along the normal of the first point of collision. It only applies to the postsolve callback, and we can ignore it for now.
  • tangentimpulse is the amount of impulse applied along the tangent of the first point of collision. It only applies to the postsolve callback, and we can ignore it for now.

Say we want to print to screen whenever a callback is called. We just need to modify the text variable we added to love.load() earlier by appending a string every time a collision action happens. We need a bit of extra code to keep the output clean too.

A list of functions you can use on contacts can be found at the Contact page.

function love.update(dt)
    ... -- substitute for the rest of love.update

    if string.len(text) > 768 then    -- cleanup when 'text' gets too long
        text = "" 
    end
end

function love.draw()
    ... -- substitute for the rest of love.draw

    love.graphics.print(text, 10, 10)
end

function beginContact(a, b, coll)
    x,y = coll:getNormal()
    text = text.."\n"..a:getUserData().." colliding with "..b:getUserData().." with a vector normal of: "..x..", "..y
end


function endContact(a, b, coll)
    persisting = 0    -- reset since they're no longer touching
    text = text.."\n"..a:getUserData().." uncolliding with "..b:getUserData()
end

function preSolve(a, b, coll)
    if persisting == 0 then    -- only say when they first start touching
        text = text.."\n"..a:getUserData().." touching "..b:getUserData()
    elseif persisting < 20 then    -- then just start counting
        text = text.." "..persisting
    end
    persisting = persisting + 1    -- keep track of how many updates they've been touching for
end

function postSolve(a, b, coll, normalimpulse, tangentimpulse)
-- we won't do anything with this function
end

And now you know how to use world callbacks!

To better explore how this world behaves and see when the callbacks are invoked, add some controls to allow you to push around the ball:

function love.update(dt)
    world:update(dt)

    if love.keyboard.isDown("right") then
        ball.b:applyForce(1000, 0) 
    elseif love.keyboard.isDown("left") then
        ball.b:applyForce(-1000, 0) 
    end
    if love.keyboard.isDown("up") then
        ball.b:applyForce(0, -5000)
    elseif love.keyboard.isDown("down") then
        ball.b:applyForce(0, 1000)
    end

    if string.len(text) > 768 then    -- cleanup when 'text' gets too long
        text = "" 
    end
end


Finished

Screenshots

Screenshot of the finished product.

main.lua

function love.load()
    world = love.physics.newWorld(0, 200, true)
        world:setCallbacks(beginContact, endContact, preSolve, postSolve)

    ball = {}
        ball.b = love.physics.newBody(world, 400,200, "dynamic")
        ball.b:setMass(10)
        ball.s = love.physics.newCircleShape(50)
        ball.f = love.physics.newFixture(ball.b, ball.s)
        ball.f:setRestitution(0.4)    -- make it bouncy
        ball.f:setUserData("Ball")
    static = {}
        static.b = love.physics.newBody(world, 400,400, "static")
        static.s = love.physics.newRectangleShape(200,50)
        static.f = love.physics.newFixture(static.b, static.s)
        static.f:setUserData("Block")

    text       = ""   -- we'll use this to put info text on the screen later
    persisting = 0    -- we'll use this to store the state of repeated callback calls
end

function love.update(dt)
    world:update(dt)

    if love.keyboard.isDown("right") then
        ball.b:applyForce(1000, 0)
    elseif love.keyboard.isDown("left") then
        ball.b:applyForce(-1000, 0)
    end
    if love.keyboard.isDown("up") then
        ball.b:applyForce(0, -5000)
    elseif love.keyboard.isDown("down") then
        ball.b:applyForce(0, 1000)
    end

    if string.len(text) > 768 then    -- cleanup when 'text' gets too long
        text = ""
    end
end

function love.draw()
    love.graphics.circle("line", ball.b:getX(),ball.b:getY(), ball.s:getRadius(), 20)
    love.graphics.polygon("line", static.b:getWorldPoints(static.s:getPoints()))

    love.graphics.print(text, 10, 10)
end

function beginContact(a, b, coll)
    x,y = coll:getNormal()
    text = text.."\n"..a:getUserData().." colliding with "..b:getUserData().." with a vector normal of: "..x..", "..y
end

function endContact(a, b, coll)
    persisting = 0
    text = text.."\n"..a:getUserData().." uncolliding with "..b:getUserData()
end

function preSolve(a, b, coll)
    if persisting == 0 then    -- only say when they first start touching
        text = text.."\n"..a:getUserData().." touching "..b:getUserData()
    elseif persisting < 20 then    -- then just start counting
        text = text.." "..persisting
    end
    persisting = persisting + 1    -- keep track of how many updates they've been touching for
end

function postSolve(a, b, coll, normalimpulse, tangentimpulse)
end



Other languages